Aleko 690L Buku Petunjuk - Halaman 8

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Sander Aleko 690L. Aleko 690L 17 halaman. Drywall sander
Juga untuk Aleko 690L: Buku Petunjuk (12 halaman)

Halaman Cetak

6. Installation & Sandpaper Replacement (See following picture)

Note: Prior to installation or removing the sandpaper, make sure to not only switch off the

device, but also cut off the power supply.

Installation Guide

To ensure the replacement procedures, place the device on the smooth ground prior to

installation. Take the sandpaper from the toolbox, and then fix it onto the disk (see Fig .2). The

back of the sandpaper (Item 1) will automatically glue with the disk/adhesive disk (Item 2),

making both connection and conduction available.

In order to promote the grinding efficiency, it is necessary to change the sandpaper after the

device has been operational for a certain period. Firstly, switch off the device and disconnect

the socket. Then, remove the previous sandpaper entirely from the disk, so as to lay new

sandpaper neatly as well as facilitate future replacement. At last, fix new sandpaper in position.

Sandpaper Overview

Grinding towards the target wall and object is possible with abrasive grains and sandpaper

twisting upon operations. The sandpaper is classified into various categories according to its

dimensions. It is recommended to select the sandpaper in accordance with actual size of the

disk. The more abrasive grains included on the sandpaper, the better flatness and parallelism

can be achieved via grinding, while the grinding efficiency will fall accordingly and vice versa.

Therefore, the sandpaper (Ф225mm) is recommended upon actual needs.

Warning ： Prior to the sandpaper replacement or installation, do read safety precautions

and installation guide carefully.