Aleko 690L Buku Petunjuk - Halaman 3
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Sander Aleko 690L. Aleko 690L 12 halaman. Drywall sander
Juga untuk Aleko 690L: Buku Petunjuk (17 halaman)
Halaman Cetakwww.AlekoDrywallSander.com
1．Warning & Statements
Note: In order to reduce the hazards of fire, electrical shock and injury, etc, the statements listed below
shall be taken into consideration upon application of electric tools.
1． Understand your electric tool fully by going through the user manual carefully together with identifying
the application, limitation and potential risk accordingly.
2． Adopt protective appliances and act by conforming to the due order strictly.
3． Remove all the regulatory instruments, and form the habit to check about that prior to application of
electric tools.
4． Keep the operational site clean. Accidents are most likely to occur in case that the electric tools are
used in a messy and dirty place, or on the workbench.
5． Any operation in unsafe conditions is strictly prohibited. Do not use the electric tools in places
exposed to damp/moisture, or leave them outside in rainy days. Make sure to keep the
operational site bright enough.
6． Keep the children away from the devices. Certain distance shall be guaranteed as for the children in
search of on-site operational experience.
7． Actions shall be taken to avoid the workshop accessible by children without permission, such as
locking the door, cutting off the power supply or taking away the launch key.
8． Do not use the devices at will. To ensure the overall quality of work piece and maintain security
anyway, please use the devices within the design capacity.
9． Use the devices correctly, and do not operate them in
overloading or abnormal status.
10．Ensure appropriate clothing. Do not wear loosen clothes, gloves, tie, knot, etc. which may result in
hazards of being entangled by running devices. Prefer shoes with skid proof soles to avoid slipping, and
cut the hair to the proper length.
11．Remember to wear protective spectacles. Abundant dust may come out in the buffing process, thus
it's necessary to wear dust mask. Glasses in daily use incorporate lens with impact resistance only, which
could by no means meet the safety requirements.
12．Hold the work piece tightly, if necessary, you may use a clamp or vice, which appears to be safer
than grabbing with hands.
13．Do not place your hands over the twisting disk. Meanwhile, stand still during the operations.
14．Prior to adopting the device, check if the disk suffers from defects as rupture and the sandpaper is
well-composed.
15．Ensure tight connections at the disk and other joints.
16．When using the device, remember to hold the handle firmly. Single-hand operations and any
intentions to touch the disk are strictly prohibited.
17．Before switching on, the disk shall be away from any contact of other objects.
18．Prior to application, the device shall be powered and switched on to make the disk twist at full speed.
Avoid waver arising from installation error and misplaced disk. In case of any malfunction, cut off the
power supply and cease the operations at hand immediately.
19．Treat the device maintenance cautiously. Keep the grinder
sharp and safe at any time. In addition, follow the instructions to lubricate the device and replace
appropriate accessories.
20．The power supply must be cut off during maintenance, such as the replacement of accessories,
sandpaper, etc.
21．Avoid direct connection to power supply. Before power on, check if the switch for the device is off in
advance.
22．Use the accessories according to the instructions. Read through the user manual in details, and
select right accessories accordingly, otherwise, it may result in unexpected injuries.
23．Check if the components or devices are damaged at any time.
In case of any failure or abrasion, replace the device at once. Otherwise, it may affect working efficiency
or even result in accidents.
24．Keep an eye on the device to cancel it. Make sure to switch off, and wait until the device finally
ceases.
25．As for adoption of the device, only apply specified parts for replacement.
26．In case of maintenance or replacement, adopt specified spare parts only.
3