Directed Electronics 3100 Panduan Instalasi - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Alarm Mobil Directed Electronics 3100. Directed Electronics 3100 16 halaman. Car security

Halaman Cetak

Directed Electronics 3100 Panduan Instalasi

Onboard Dual Stage Zone 2 Impact Sensor

Impact sensor adjuster

There is a dual-stage impact sensor inside the control unit. Adjustments are

made via the rotary control as indicated above. Since the impact sensor does

not work well when mounted firmly to metal, we recommend against screwing

down the control module. We recommend mounting the control module to a

large wiring loom.

Important:

When adjusting the sensor, it must be mounted in the same loca-

tion where it will be after the installation is completed. Adjusting the sensor

and then relocating the module requires readjustment.

Bypassing Sensor Inputs

Sensors can be bypassed during auxiliary channel and add-on accessory op-

erations. During an auxiliary channel output apply ground to the H1/6 wire,

the sensors will be bypassed and will not trigger the alarm until several seconds

after the ground ceases. This is ideal for add-on remote starters and window

control modules:

ADD-ON REMOTE

START UNIT