Clarke 6499630 Panduan Memulai Cepat - Halaman 2

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Pompa Air Clarke 6499630. Clarke 6499630 2 halaman. Chemical plunger pump

FITTING THE PUMP TO A BARREL

1. Fit the telescopic extension with filter to the pump.

• You can fit the extension inlet tube in between if

required.

2. Adjust the telescopic extension tube to the required length.

• The bottom of the telescopic extension should be just off

of the bottom of the barrel when fitted.

3. Screw the pump into the threaded opening of the barrel.

USING THE PUMP

1. Place a suitable container under the outlet tube.

2. Pump the handle to draw fluid from the barrel.

• The first time you use the pump, you may need to pump

the handle a few times to prime the pump.

• Each 'pump' of the handle will draw approximately 0.3L

of fluid.

SPECIFICATIONS

Container Adaptor Size

Max Flow

Inlet Tube Length

Inlet Tube Diameter

Outlet Tube Diameter

Maximum Drum Size

Min-Max Height (with extension tube fitted)

Dims (W x D x H)

Product Weight

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of

purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not

used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior

permission.

This guarantee does not effect your statutory rights.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

2" BSP

0.3 litres per stroke

300 mm

21.5mm

16.7mm

205 litres

1130 - 1400 mm

485 x 90 x 1400 mm (fully extended)

1.2kg