Clarke CFTP12 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 6
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Pompa Air Clarke CFTP12. Clarke CFTP12 8 halaman. 12v oil & diesel pump
Halaman Cetak
setup is protected from passers by. Set the switch, at the rear of the pump to
ON (I).
Do not allow the pump to run dry for more than 30 seconds after pumping has
stopped.
MAINTENANCE
The pump requires no maintenance, but should be inspected before use to
ensure that the electric power cables and clamps are in good condition.
Ensure that the hoses used are perfectly sound.
Avoid using solvents if cleaning plastic parts, as most plastics are susceptible to
damage from various types of commercial solvents.
Store the pump in dry conditions protected from the weather.
For any problems requiring dismantling of the pump, contact your CLARKE
dealer.
SPECIFICATIONS
Fluid Classification / Fluids to be used
Max. Head
Max. Flowrate (dependant upon
temperature/type of oil)
Max Operating Time
Max. Temperature of liquid being pumped
Self Priming
Weight
Inlet Hose Length
Outlet Hose Length
Motor
IP Rating
Please note that the details and specifications contained herein, are correct at the time
of going to print. However, CLARKE International reserve the right to change
specifications at any time without prior notice. Always consult the pump's data plate.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
Clean (motor oil, diesel)
0.7 m
1.5 litres/min (diesel)
0.2 litres/min (engine oil)
30 mins
o
60
C (Oil) / 45
Yes
0.85 kg
1.2 m
1.6 m
12V DC / 9.4 A
IPx4
6
o
C (Diesel)