Directed Electronics Viper 140 HF Panduan Pemilik - Halaman 17
Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Alarm Mobil Directed Electronics Viper 140 HF. Directed Electronics Viper 140 HF 18 halaman.
Halaman CetakQUICK REFERENCE GUIDE:
To lock the doors using your remote
Pressing
for one second will lock the doors. The parking lights will
flash once to confirm the doors are locked. NOTE: Control of power door
locks is optional. Extra parts and labor may be necessary to interface
with power door locks.
To unlock the doors using your remote
To unlock the doors, press
flash twice to confirm the doors are unlocked.
To remote start the vehicle
Press
and
on the transmitter for one second. The parking lights
will flash to confirm remote start operation. Once the remote start has
been activated, the vehicle will run for the preprogrammed period or
until a shutdown input is triggered.
Using Remote Start with Factory Remote Systems
If this remote start system has been interfaced with an original equip-
ment from manufacturer (OEM) factory remote system, the Remote
Start/Valet Take-Over sequence can be programmed to initiate with one
to three (1-3) presses of one of the OEM transmitter buttons.
OEM transmitter button used for Remote Start/Valet Take-Over
sequence______________________________________________
Number of OEM transmitter button presses required to initiate
Remote Start/Valet Take-Over sequence____________________
14
for one second. The parking lights will
1999 Directed Electronics, Inc.
©