Directed Electronics 210HV Panduan Pemilik - Halaman 11

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Starter Jarak Jauh Directed Electronics 210HV. Directed Electronics 210HV 18 halaman. Remote start keyless entry system

Halaman Cetak

disabling the system without a transmitter

If your remote transmitter is lost or damaged, you can manually

override the system. To do this, you must have the vehicle's igni-

tion key and know where the Valet

check with the installer for the location of the Valet

To disarm the security system,

turn the ignition to the ON posi-

tion. Press and release the Valet

switch within 10 seconds. The

status LED will stop flashing and

the vehicle should start. If the

vehicle does not start, you may

have waited too long; turn the

ignition off and repeat the process.

Location of Valet Button_________________________________

silent mode

To temporarily turn off the arm or disarm chirps, use Silent

Mode™. Simply press

arming or disarming, and the confirmation chirp(s) will be elim-

inated for that one operation only. If you want the arm/disarm

chirps turned off permanently, your dealer can do this for you.

switch is located. Be sure to

DRW-35

for less than one second before

switch.