Directed Electronics 4-button series Panduan Instalasi - Halaman 15
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Starter Jarak Jauh Directed Electronics 4-button series. Directed Electronics 4-button series 20 halaman. Keyless entry remote start 4-button series
Halaman Cetak
Bitwriter only options
If programming with the Bitwriter®, the learn routine can be locked or unlocked. If the learn routine
has previously been locked, it must be unlocked with Bitwriter® - this cannot be done manually with
the Valet button.
The Bitwriter®
gives you access to a wider range of system options. These features and the adjustments
that may be programmed are described in the table below.
Menu Item
Feature
1
Engine Runtime
2
Diesel start type
Diesel start delay time
3
(seconds)
4
Virtual Tach Fine Tune
5
Remote control pro-
gramming
6
Feature Programming
Bitwriter feature descriptions
1. Engine runtime:
Sets engine runtime during normal remote start operations from 1-60 minutes.
2. Diesel Start Type:
OFF: there is no delay before the engine cranks with the remote start
Timed: turns on the timer for the delay before the engine cranks (to be used in conjunction with the
Diesel Start Delay).
3. Diesel start delay:
Sets the delay before engine crank in 1 second intervals from 1- 90 seconds for diesel engine
vehicles.
4. Virtual tach fine tune:
Adds or subtracts crank time in VirtualTach mode to overcome engine types that short crank or
over-crank on the first start attempt.
5. Remote Control Programming:
Locks and unlocks the user's ability to enter the remote control/reset menu, and manually change
any functions using the Valet Button.
6. Feature Programming:
Locks and unlocks the user's ability to enter the feature menus and manually change the main unit
programming using the Valet Button.
© 2012 Directed. All rights reserved.
Default
Options
12 min.
1-60 min.
Off
Timed
1-90 sec.
15 sec
Not initialized
0 to 1 second in 50 millisecond increments
Unlocked
Locked
Unlocked
Locked
15