Clarke 01602A Panduan Operator - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Operator untuk Mesin Lantai Clarke 01602A. Clarke 01602A 20 halaman.

ENGLISH

HOW TO OPERATE THE MACHINE

How To Operate the Fusion 20 (non-traverse)

1. Turn the key switch "ON".

2. When either pad power switch ( 1 - ﬁ gure 9) is pushed

in, the pad motor will start.

3. Push the machine forward and guide it with the control

handles.

4. To reverse the direction, stop the machine by pulling

back on the control handles and then pulling the ma-

chine backwards.

5. When you stop the machine, be sure to turn the key

switch off.

How To Operate the Fusion 20T (traverse)

1. Turn the key switch "ON".

2. Turn the pad power switch on (1 - ﬁ gure 10).

3. When either the right or left pad/traverse switch (2 -

ﬁ gure 10) is pushed in, the pad motor will start and the

traverse motor will propel the machine forward.

4. Control the speed of traverse by using the speed con-

trol knob (3 - ﬁ gure 10).

5. To stop, release the pad/traverse switch.

6. To reverse the machine, push in the traverse reverse

switch (4 - ﬁ gure 10) and either the right or left pad/tra-

verse switch (2 - ﬁ gure 10) at the same time.

7. To stop, release the pad/traverse switch.

8. When you stop the machine, be sure to turn off the key

switch.

-10- FORM NO. 56091084

Figure 9

Figure 10

Clarke

Operator's Manual (EN) - FUSION 20 / 20T