Clarke JETSTAR 1700 Panduan Operator - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Operator untuk Mesin Lantai Clarke JETSTAR 1700. Clarke JETSTAR 1700 20 halaman. Ultra speed burnisher
Juga untuk Clarke JETSTAR 1700: Petunjuk Pengoperasian & Pemeliharaan (8 halaman)

Halaman Cetak
Clarke JETSTAR 1700 Panduan Operator

CARE AND MAINTENANCE

This burnisher will give you many years of trouble-free
service provided it is given proper care. Throwing,
dropping, bumping across the thresholds and other
misuse may result in a damaged unit and invalidate the
warranty. When storing your burnisher, always remove
the pad.
Pads can be cleaned by washing in warm water and a mild
detergent, rinsing, and hanging up to dry.
The pad driver spindle bearings should be re-lubricated
once a year. Do not over lubricate. Allow grease to enter
bearings slowly.
NOTE: Do not store the machine resting on the
pad driver, the pad driver will warp and cause
vibration.
Inspections and Repairs
Take the machine to the nearest Clarke Technology
authorized repair location once a year for the maintenance
inspections.
To make any repairs, take the machine to the nearest
Clarke Technology authorized repair location.
WARNING:
Maintenance and repairs
must be done by authorized
personnel only
Page - 8 -
CLARKE TECHNOLOGY Operator's Manual - Ultra Speed Burnisher 1700