Clarke DEVIL 350B 110V Petunjuk Pengoperasian & Pemeliharaan - Halaman 5

Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian & Pemeliharaan untuk Pemanas Clarke DEVIL 350B 110V. Clarke DEVIL 350B 110V 17 halaman.

ELECTRICAL CONNECTIONS

DEVIL 350B (230V) UNITS

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY

BEFORE CONNECTING THE PRODUCT TO THE POWER SUPPLY.

The 230v model is provided with a 13 amp BS 1363 plug, fitted with a 13amp

fuse and MUST be connected to a standard, 230 Volt (50Hz) electrical supply,

preferably through a suitably fused isolator switch.

If the plug has to be changed because it is not suitable for your socket or

because of damage, it must be removed and a replacement fitted, following

the wiring instructions shown below. The old plug must be discarded safely as

insertion into a power socket could cause an electrical hazard.

WARNING: THE WIRES IN THE POWER CABLE OF THIS PRODUCT ARE

COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE:

BLUE = NEUTRAL

The wires in the mains lead should be

wired up in accordance with the

following colour code:

• Connect the GREEN & YELLOW

wire to the plug terminal

marked with a letter E or

• Connect the BROWN wire to the

plug terminal marked a letter

"L".

• Connect the BLUE wire to the

plug terminal marked a letter "N".

The fuse in the plug must be replaced with one of the same rating and this

replacement must be ASTA approved to BS1362.

We strongly recommend that this machine is connected to the mains supply

via a Residual Current Device (RCD).

DEVIL 350B (110V) UNITS

The 110V model is fitted with a 32 amp, three pin industrial plug to EN 60309

and MUST be connected to a 110 volt, 1 phase 50 Hz supply through a suitably

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

BROWN = LIVE

YELLOW AND GREEN = EARTH.