Clarke GRH15 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 7
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Pemanas Clarke GRH15. Clarke GRH15 17 halaman. Portable gas radiant heater
Halaman Cetak
INSTALLATION
UNPACKING
Remove the heater from the carton and remove all protective material used
for shipment. Check the heater for possible shipping damage. Should any
damage be apparent, please notify your CLARKE dealer immediately.
ASSEMBLING THE SUPPORT STAND
1. Connect the stand base section to
the upper part and secure with the
wing nut supplied.
LOCATING THE HEATER
Although a 'tip-over' switch is fitted, the heater and propane gas cylinder
must both be located on a hard, level surface to minimize the risk of
accidental tipping. The propane gas cylinder should be adequately
restrained if needed. Only operate this heater with the supply cylinder in the
upright position.
This heater must only be used in locations where the potential for damage to
the heater or personal injury (burns), is reduced to a minimum.
The heater must be located where it will not be exposed directly to rain and/or
dripping water.
Use of this heater in a drafty area reduces its efficiency. Wherever possible,
operate in a draft free area.
The heater must always be directed away from the propane gas cylinder.
Position the heater at a safe distance of 1 metre from combustible materials.
The heater must not be used on floors covered in combustible materials.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7