Clarke 1801455 Panduan Memulai Cepat - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Peralatan Clarke 1801455. Clarke 1801455 3 halaman. Drum brake tool kit

Brake Cable Tool

Slide the claws of the tool between the

head of the brake cable and the spring.

Close the handles to lock them, thereby

allowing the brake shoe to be

manouvered off the cable.

Hose Clamp

Piston Retainer

With the shoes removed, ensure the

pistons are maintained in place by

clamping them as shown.

Shoe Clearance Adjuster

Shoe Retaining Pin, Cap Remover

Push the tool firmly on to the Spring

Retaining Plate, then turn through 90

degrees before releasing pressure.

Remove the plate and spring followed by

the retaining pin from behind the back

plate.

Before operating on the

hydraulic system, where

hydraulic lines are opened,

clamp the flexible hose as

near as possible to the

union with the back plate.

Remove the dust proof cover at the back

plate, and insert the tool into the hole,

engaging with the serrations of the adjuster.

Lever the tool to turn the adjuster.