Clarke 3108005 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 12
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Peralatan Clarke 3108005. Clarke 3108005 17 halaman. 3pc air tool kit
Halaman Cetak
TYRE INFLATOR OPERATION
This lightweight pistol grip tyre inflator
complete with air pressure gauge is
suitable for inflating tyres on motor
vehicles and trailers etc.
1. Attach the hose to the tyre inflator
and fully tighten.
2. Remove the dust cap from the
tyre valve and check that the tyre
valve is clean before connecting.
3. Depress the lever on the end of
the connector and push the connector fully home onto the tyre valve.
Release the lever to hold the connector in position. (If the valve leaks, the
connector may need repositioning). Correct position is confirmed by a
steady reading on the gauge.
4. Check the tyre pressure on the gauge.
5. Pull the trigger to inflate the tyre, or press the button on the side of the pistol
grip to deflate. Re-check the tyre pressure.
6. When the tyre pressure is correct, carefully disconnect and remove the
connector. Replace the dust cap on the tyre valve.
IMPORTANT: The air pressure gauge on this product is for guidance only. It is
important that you check the pressure with an approved, calibrated
gauge.
AIR HOSE
The recoil hose included in this kit is
fitted with connectors for use with the
other items.
AIRLINE ACCESSORIES
An extensive range of airline
equipment is available from your
Clarke dealer including hoses,
retractable hose reels, filter/
regulators, in-line regulators, pressure
gauges, spray gun cleaning kit,
respiratory masks and safety goggles.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
12