Clarke 3120178 Petunjuk Pengoperasian & Pemeliharaan - Halaman 7
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian & Pemeliharaan untuk Peralatan Clarke 3120178. Clarke 3120178 17 halaman. Needle scaler/chisel kit
Halaman Cetak
BEFORE USE
FITTING THE NEEDLE HOLDER
The Needle Scaler is packed in two
halves:
• The main body/drive assembly
• The needle holder with needles
1. Screw the needle holder with
needles, firmly onto the nose of the
tool.
• Tighten the three grub screws
shown with a hex key to secure
the needle tube in place.
FITTING THE CHISELS
1. Insert the chisel into the air
hammer as shown.
2. Screw the retaining spring fully
onto the main body.
• Use the lugs to gain purchase
and tighten.
CONNECTING THE AIR SUPPLY
WARNING: COMPRESSED AIR CAN BE DANGEROUS. ENSURE THAT YOU
ARE FAMILIAR WITH ALL PRECAUTIONS RELATING TO THE USE OF AIR
COMPRESSORS AND A COMPRESSED AIR SUPPLY.
1. Remove the protective plug from the air inlet port and connect a suitable
hose.
2. A gauze filter is fitted within the air inlet adapter. Ensure this filter is always in
place and clean. The airline is connected to the adapter, preferably via a
quick release coupling (not supplied).
3. Connect the other end of the hose to the compressor.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7