Clarke 6462199 Panduan Petunjuk Pengoperasian & Pemeliharaan - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Petunjuk Pengoperasian & Pemeliharaan untuk Peralatan Clarke 6462199. Clarke 6462199 17 halaman. Multi function tool
Halaman Cetak
USING THE SANDING ATTACHMENT
WARNING: ALWAYS WEAR EYE PROTECTION AND A DUST MASK.
SELECT THE CORRECT SANDING SHEET
The 'grit' of the sanding sheet is identified by a number on the back of the
sheet. The lower numbers are more abrasive. (use lower grit for rough wood
and higher grit for finishing)
SANDING
1. Hold the tool tightly and move the
On/Off switch forward.
2. Set the tool on the workpiece.
3. Let the tool to do the work and do
not apply excessive pressure to
the sanding pad.
• Applying excessive pressure will
cause the sanding sheets to
wear out faster and can
damage the motor.
4. If sanding into corners, use the tip
or corner of the sanding pad.
• When sanding, the sanding sheet can heat up. You must let the sanding
sheet cool down regularly.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
11