Directus Prodigy One NN-SC-1001 Panduan Instalasi - Halaman 9
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Sistem Video Mobil Directus Prodigy One NN-SC-1001. Directus Prodigy One NN-SC-1001 15 halaman. Nissan/infiniti
Halaman CetakLocate 4 NEW provided mounting screws and fasten into provided locations to create
stand–off mount from previous circuit board provided. (Some models may require
more spacing to mount Directus PCB. Use provided washers to space as needed.)
Locate DIRECTUS provided circuit board and align as shown in pic to newly installed
mounting screws installed in previous step. Use provided screws to mount Circuit
board. (Additional spacing may be required on some models) Be sure not to over tight-
en screws.
Locate newly installed touch panel ribbon cable and connect to location provided on
new circuit board. Please be sure to seat ribbon cable properly. Use double sided tape
under ribbon cable connection for proper fastening and stability.