Clarke CRT 40 Petunjuk Pengguna - Halaman 3
Jelajahi secara online atau unduh pdf Petunjuk Pengguna untuk Peralatan Clarke CRT 40. Clarke CRT 40 6 halaman. 40-piece rotary tool kit
Juga untuk Clarke CRT 40: Petunjuk Pengguna (13 halaman)
Halaman Cetak
PARTS DIAGRAM
10
Thank you for purchasing this CLARKE 40 piece Rotary Tool Kit
Please read this leaflet thoroughly and follow the instructions carefully, in doing so
you will ensure the safety of yourself and that of others around you, and you can
look forward to the tool giving you long and satisfactory service.
PACKAGE CONTENTS
The package contains:
1
Rotary Tool
1
Flexible Drive
1
Tool Stand Complete
1
Chuck spanner
40
Accessories/consumables
1
Case
SAFETY PRECAUTIONS
•
ALWAYS keep the power cable away from the moving parts of the rotary tool.
•
ALWAYS switch off the tool and allow to stop fully before putting to one side.
•
In the event of power failure or disconnection of supply for whatever reason,
when the tool is in operation...ALWAYS SWITCH OFF the tool before putting
down, then disconnect from the mains supply.
•
ALWAYS ensure the accessories used are rated to rotate at, AT LEAST the
maximum speed of the tool.
•
NEVER attach an assembly wrench to your rotary tool with a piece of string or
anything similar.
•
NEVER press the drive shaft locking button when the rotary tool is operating.
•
ALWAYS ensure that the mandrel diameter is the same as the collet diameter.
•
ALWAYS use a clamping device for securing the work piece. Keep your hands
away from the work piece.
•
ALWAYS wear safety goggles, manufactured to the latest European Safety
Standards. Everyday eyeglasses do not have impact resistant lenses, they are
not safety glasses.
•
NEVER force the tool, only light pressure is required to perform a task.
•
NEVER overtighten the screw when mounting a grinding disc or cutting disc
on to its mandrel.
•
NEVER allow children to operate this tool.
•
IF the tool begins to vibrate during operation, switch OFF immediately and
investigate the cause.
3