Clarson PUBLIC III Petunjuk Pengoperasian dan Pemasangan - Halaman 2
Jelajahi secara online atau unduh pdf Petunjuk Pengoperasian dan Pemasangan untuk Headset Clarson PUBLIC III. Clarson PUBLIC III 2 halaman. With cs60 dect
wireless headset system
Juga untuk Clarson PUBLIC III: Petunjuk Pengoperasian dan Pemasangan (4 halaman)
Halaman CetakInstallation of Components
Link the microphone loudspeaker unit 40.054.301 (jack 2)
with the central unit 40.054.311 (HEADSET jack) via patch cable.
Connect the headset to jack of the microphone loudspeaker unit.
Headset, monaural
Ref. 40.030.011
Headset, binaural
Ref. 40.030.007
Central unit
Ref. 40.054.311
Microphone loudspeaker
unit Ref. 40.054.301
RJ 10
4-pin
RJ 45
8-pin
Patch cable, 3 m
with RJ45 connector (8/8-pin)
Ref. 40.054.327
RJ 10
4-pin
RJ 45
8-pin
HEADSET
jack
Activation / Deactivation of HEADSET Interface
Service Side
Activate headset mode:
Switch the system OFF (button
Push and hold until
above the button flashes once
Switch the system ON (button
Headset mode is now activated
Microphone and loudspeaker
service side are deactivated
LED
above button
(0,5 sec on - 0,5 sec off)
indicating headset mode
Deactivate headset mode/
Back to standard mode:
Switch the system OFF (button
Push and hold until
above the button flashes once
Switch the system ON (button
System again in standard mode
RJ 45
or
8-pin
Briefly disconnect the unit
from the power supply
Public Side
Activate headset mode:
Switch the system OFF (button
)
Push and hold until
LED
above the button flashes twice
Switch the system ON (button
)
Headset mode is now activated
Microphone and loudspeaker on
public side are deactivated
LED
above button
flashes
(1 sec an - 0,2 sec aus)
indicating headset mode
Deactivate headset mode /
Back to standard mode:
Switch the system OFF (button
)
Push and hold until
LED
above the button flashes twice
Switch the system ON (button
)
System again in standard mode
or
Briefly disconnect the unit
from the power supply
)
LED
)
flashes
)
LED
)