CLAS OH 6035 Manual - Halaman 7

Jelajahi secara online atau unduh pdf Manual untuk Jacks CLAS OH 6035. CLAS OH 6035 12 halaman. Service garage jack
Juga untuk CLAS OH 6035: Manual (9 halaman)

Halaman Cetak

OH 6035

SERVICE GARAGE JACK 3T 95mm

CHARACTERISTICS

Capacity: 3T

Min Height.: 95mm

Max. Height: 515mm

Weight: 39.5kg

Dimensions: L. 772 x W.367 x H. 1225mm

Standard: Directive machinery 2006/42/EC, EN 1494:2000+A1:2008

Product lifetime : 8 years

ASSEMBLY

1. Assemble the 2-piece with bolt and fixed T shape handlewith screw supplied.

2. Insert handle into the handle socket. Tighten the bolt on handle socket to prevent

accidental removal of handle while in use.

USING INSTRUCTIONS

Lifting

1. Prior to operating the jack, remove any accumulated air from the system below:

• Pull the handle and turn it counterclockwise whilst held in this position

• Pump the jack several times to ensure internal lubrication and bleed the accumulated air

from the system.

2. Refer to the vehicle manufacturer owner's manual to locate approved lifting points on

the vehicle. Center jack saddle under lift point.

3. This jack are fitted with a foot pedal that gives a faster approach to the load.

4. Pump handle full stroke until load reaches desired height.

5. Transfer the load to appropriately rated jack stands.