CLAS OP 1407 Manual - Halaman 7

Jelajahi secara online atau unduh pdf Manual untuk Pengemudi Dampak CLAS OP 1407. CLAS OP 1407 12 halaman. Pneumatic equipement impact wrenches/ratchet wrenches
Juga untuk CLAS OP 1407: Manual (12 halaman)

Halaman Cetak

PNEUMATIC EQUIPEMENT IMPACT WRENCHES/RATCHET WRENCHES

TOOLING APPLICATION

Impact wrench

Ratchet

Drill

Screwdriver

Sanders

Polisher

Air saw

File

Air hammer

Needle scaler

Windscreen cutter

Nibbler

Shear

Die grinder stell

Angle grinder

Blind riveting

Belt sander

Engraving pen

Cut off tools

Spot weld drill

Sticker grinder

AIR SUPPLY REQUIREMENTS

• Supply the tool with 6.3bar of clean, lubricated, dry air. Higher pressure drastically reduces tool life and/or can

cause sever injury.

• Connect the tool to the airline using pipe, hose and tting sizes.

• Do not install a quick coupler directly into the air hose connector.

• In order to have the tool working to full satisfaction, the minimum air supply must beat least 10% higher than the

indicated air consumption of the air tool.

• Use recommended hose size and length. Don not connect the tool to the airline system without incorporating an

easy to reach and operate air shut off valve.

• Air supply should be lubricated.

For tightening and unscrewing of threaded fastener

Tightening and unscrewing of various kinds of bolts and nuts

For drilling holes in metals, wood and plastics

For tightening and unscrewind of wood ant metal screws with hex and Phillips

head

To remove layers of paint and lling material

To polish painted surfaces and nish surfaces prior to painting

For cutting sheet steel, carbody panels, pipes, steel, plastic and wood

File for metals, wood and plastics

To cut car body panels, bolts, screws and nuts

To remove rust, paint and cinder after welding

To remove cement, sealing material and rubber from windscreen frame

To cut (nibble) car body panels, sheet steel, stainless steel and corrugated

panel sheets

With this tool you can cut metal plate

For use with bonded abrassive mounted grinding wheels rotary les and car-

bide burrs providing their speed rating matches the speed of the grinder

Light grinding and dressing of welds

To rivet two metal panels together

For sanding and polishing in con ned areas

To mark tools and parts made out of metal, stone and other hard materials

Used for cutting operation on bearings, exhaust pipes and clamps

For controlled removal of spot welds on car body repairs

For removing sticker, labels and tags from painted at surfaces