Lenovo ThinkStation P700 Panduan Konfigurasi - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Konfigurasi untuk Desktop Lenovo ThinkStation P700. Lenovo ThinkStation P700 49 halaman. How to create and configure raid arrays
Juga untuk Lenovo ThinkStation P700: Panduan Konfigurasi (15 halaman), Konfigurasi Perangkat Keras (35 halaman), Panduan Keselamatan, Garansi, dan Pengaturan (2 halaman)

Configuring RAID arrays using the Avago controllers

Legacy BIOS Method – Setting up a RAID array

***Note: in order for the OS to recognize drive(s) attached to the Avago controller, the drive(s) must be

configured as a RAID array or JBOD mode. Single drive RAID 0 arrays are acceptable.

Use this method to create a basic RAID array using the Avago MegaRAID SAS/SATA FLEX RAID Adapter or

Avago 9364-8i adapter with the system BIOS set to Legacy mode.

1. Install the desired drives and Avago controller into the system (see "P500/P510-P700/P710-

P900/P910 RAID Hardware Configuration" document for installation instructions).