Lenovo 9360-4EX Panduan Instalasi - Halaman 15

Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Server Lenovo 9360-4EX. Lenovo 9360-4EX 42 halaman.

Removing and installing the outriggers (side stabilizers)

The outriggers are the stabilizers with wheels that are installed on the sides of the rack cabinet. After the

rack is in its final location and will not be moved more than 2 m (6 ft), you can remove the outriggers.

DANGER:

Always relocate the rack cabinet with the outriggers installed. Keep the outriggers and install them if you

have to move the rack to another location in the future.

Figure 3. Removing and installing the outriggers

To remove the outriggers, use the M5 hex wrench that comes in the hardware kit to remove the four bolts

that attach each outrigger to the rack cabinet. Keep the outriggers and bolts for future use if you have to

move the rack.

Note: Before you attach an expansion rack to a standard rack or another expansion rack, you must remove the

outriggers from the racks so that the racks fit together correctly.

Install the outriggers before you move the rack cabinet to another location. Use the M5 hex wrench that

comes in the hardware kit to install the four bolts that attach each outrigger to the rack cabinet.

Note: If lower side panels are attached to the upper side covers, you must remove the lower side panels