Lenovo ThinkSystem SR650 Panduan Memulai Cepat - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Server Lenovo ThinkSystem SR650. Lenovo ThinkSystem SR650 14 halaman. -48 v dc

To Connect:

1. Turn everything OFF.

2. First, attach all cables to devices.

3. Attach signal cables to connectors.

4. Attach power cords to outlet.

5. Turn device ON.

Figure 3. Hot-swap power supply label on the cover

Attention: This type of power supply is hot-swap only when two power supplies are installed for

redundancy. If only one power supply is installed, you must turn off the server before removing the power

supply. This power supply only supports some special configurations of the SR650/SR630/SR550 servers.

For more information, consult the local Lenovo team.

在直流输入状态下，若电源供应器插座不支持热插拔功能，请务必不要对设备电源线进行热插拔，此操作可能

导致设备损坏及数据丢失。因错误执行热插拔导致的设备故障或损坏，不属于保修范围。

NEVER CONNECT AND DISCONNECT THE POWER SUPPLY CABLE AND EQUIPMENT WHILE YOUR

EQUIPMENT IS POWERED ON WITH DC SUPPLY (hot-plugging). Otherwise you may damage the

equipment and result in data loss, the damages and losses result from incorrect operation of the equipment

will not be covered by the manufacturers' warranty.

S035

CAUTION:

Never remove the cover on a power supply or any part that has this label attached. Hazardous voltage,

current, and energy levels are present inside any component that has this label attached. There are no

serviceable parts inside these components. If you suspect a problem with one of these parts, contact

a service technician.

4 4

To Disconnect:

1. Turn everything OFF.

2. First, remove power cords from outlet.

3. Remove signal cables from connectors.

4. Remove all cables from devices.