Lenovo 4014HB6 Panduan Pengguna - Halaman 28

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Lenovo 4014HB6. Lenovo 4014HB6 39 halaman. Flat panel monitor

Installing the monitor driver in Windows Vista

To use the Plug and Play feature in Windows Vista, ﬁles should be loaded from the

Reference and Driver CD.

Note: This section must be completed before continuing with the Windows Vista

automatic image setup.

Turn off the computer and all attached devices

Ensure that the monitor is connected correctly.

Turn on the monitor and then the system unit. Allow the system to boot into

Windows Vista.

Open the Display Properties window by clicking Start

Panel, and then double-clicking the Hardware and Sound icon.

Click the Personalization tab.

Click the Display Settings button.

Click the Advanced Settings button.

Clink the Monitor tab.

Clink the Properties button.

10. Clink the Drivers tab.

11. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on Update Driver

and then click the "Browse my computer for driver software" button.

12. Select "Let me pick from a list of device drivers on my computer" and then click the Next button.

13. Insert the Setup CD into the CD driver, then click the Have Disk button.

14. Click on the Browse button and navigate to the following directory:

X:\Monitor Drivers\ (where X is the drive letter designator for the CD-ROM drive).

15. Select the "L2321xwD.inf" file and click the Open button. Click the OK button.

16. Choose L2321xwD and click OK. The ﬁles will be copied from the CD to your hard disk drive.

17. Close all open windows and remove the CD.

18. Restart the system. The system will automatically select the maximum refresh

rate and corresponding Color Matching Proﬁles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display quality.

Lenovo recommends using either 1920x1080 at a refresh rate of 60Hz, or 640x480 at a refresh

rate of 60Hz.

Settings

Control

Chapter 3. Reference information

3-5