Lenovo 4426-HC1 Panduan Pengguna - Halaman 24

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Monitor Lenovo 4426-HC1. Lenovo 4426-HC1 32 halaman. Wide lcd monitor

Installing the monitor driver in Windows XP

To use the Plug and Play feature in Windows XP, files should be loaded from the

Reference and Driver CD

Note: This section must be completed before continuing with the Windows XP

automatic image setup.

Turn off the computer and all attached devices.

Ensure that the monitor is connected correctly.

Turn on the monitor and then the system unit. Allow the system to boot into

Windows XP.

Open the Display Properties window by clicking Start

Panel, and then double-clicking the Display icon.

Click the Settings tab.

Click the Advanced button.

Click the Monitor tab.

Click the Properties button.

Click the Drivers tab.

10. Open the Hardware Update Wizard window by clicking on Update Driver.

11. Select Install from a list or Specific location(Advanced), and then click Next.

12. Select "Don't search. I will choose the driver to install" option, and then click Next.

13. Click the Have Disk button. Click the Browse button and navigate to

the following directory:

X:\Monitor Drivers\Windows XP

(where X is the drive letter designator for the CD-ROM drive).

14. Select the "LEN114A .inf " file and click the Open button. Click the OK button.

15. Select LEN L2060wA and click Next. The files will be copied from the CD to

your hard disk drive.

16. Close all open windows and remove the CD.

17. Restart the system. The system will automatically select the maximum refresh rate

and corresponding Color Matching Profiles.

Note: On LCD monitors, unlike CRTs, a faster refresh rate does not improve display

quality. Lenovo recommends using either 1600x900 at a refresh rate of 60 Hz, or 640

x 480 at a refresh rate of 60 Hz.

Settings

Control

3-6

Chapter 3.