Lenovo E160C Panduan Pengguna - Halaman 9

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Ponsel Lenovo E160C. Lenovo E160C 18 halaman.

Note: Please handle carefully. Do not pull out the charging interface by

force. This may damage your mobile phone or charger.

• Before use, battery supplied with your mobile phone should be completely

charged.

• While charging, do not remove the battery or UIM card.

• Once the battery is used up, the mobile phone will shutdown automatically.

2.3 Install the UIM card

Power off the phone and then remove the back cover and the battery.

Insert the UIM card along the card slot direction with the chip side facing

downwards.

Install the battery and the back cover.

When the phone card is locked, the phone will prompt you to input PIN info to

unlock the phone. If you do not know the PIN, please contact the network operator

that sells the UIM card. Do not input PIN several times when you are uncertain, or

the UIM card will be damaged.

Prevent the phone card from static, scratch or bend when installing the phone

card. Put the phone card out of children's reach after removing the phone card.

Note: When the UIM card is not installed, wrongly installed or damaged, the

screen will display "Please insert the UIM card". The UIM card is a computer

chip containing protocol details, security information and personal

phonebook, etc.

When the phone is off, make sure the battery is properly installed. Hold the

[End key] until the boot screen appears to power on the phone. If you have set up

power-on PIN authentication, the phone will prompt you to input PIN. Input the

correct PIN and press OK key to enter normal boot screen.

Under the power on situation, to power off the phone, hold the [End key] until

the shutdown screen appears.