Lenovo Flex System EN4023 Panduan Produk - Halaman 11
Jelajahi secara online atau unduh pdf Panduan Produk untuk Beralih Lenovo Flex System EN4023. Lenovo Flex System EN4023 26 halaman. 10gb scalable switch
Halaman Cetak
TACACS+
Secure Shell (SSHv2)
BPDU Drop
Lightweight Directory Access Protocol (LDAP)
Secure Copy Protocol (SCP)
Secure FTP (sFTP)
Switch health monitoring
Brocade Fabric Watch monitoring and notification
Command-line interface (CLI) through Telnet or Secure Shell V2 (SSHv2)
Terminal emulation program connection to the serial port interface
Brocade Network Advisor (optional, can be purchased from Brocade)
Simple Network Management Protocol (SNMP) agent
Supported standards
The switches support the following standards:
IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
IEEE 802.1p Class of Service (CoS) prioritization and Tagging
IEEE 802.1Q Tagged VLAN (frame tagging on all ports when VLANs are enabled)
IEEE 802.1Qbb Priority-Based Flow Control (PFC)
IEEE 802.1Qaz Enhanced Transmission Selection (ETS)
IEEE 802.1w Rapid Reconfiguration of Spanning Tree Protocol
IEEE 802.1D Spanning Tree Protocol
IEEE 802.1s Multiple Spanning Tree
IEEE 802.3 Ethernet
IEEE 802.3ab 1000BASE-T
IEEE 802.3ad Link Aggregation with LACP
IEEE 802.3ae 10 Gb Ethernet
IEEE 802.3ap 10GBASE-KR backplane 10 Gb Ethernet
IEEE 802.3ba 40GBASE-SR4 short range fiber optics 40 Gb Ethernet
IEEE 802.3ba 40GBASE-CR4 copper 40 Gb Ethernet
IEEE 802.3u 100BASE-TX Fast Ethernet
IEEE 802.3x Flow Control (Pause Frames)
IEEE 802.3z 1000BASE-X
SFF-8431 10GSFP+Cu SFP+ Direct Attach Cable
Supported chassis and adapters
The EN4093 switches are installed in I/O module bays in the rear of the Flex System chassis, as shown in the
following figure. I/O modules are normally installed in pairs because ports on the I/O adapters that are installed in
the compute nodes are routed to two I/O module bays for redundancy and performance.
Lenovo Flex System EN4023 10Gb Scalable Switch
11