Lenovo ThinkSystem SM27A17643 Panduan Pengguna - Halaman 22
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Beralih Lenovo ThinkSystem SM27A17643. Lenovo ThinkSystem SM27A17643 45 halaman. Analog 1x8 kvm switch
Halaman Cetak
Specifying Channel Names
Default channel names for active channels are 'PC'. You have to assign
unique channel names to identify each connected server.
Note that channel names are stored on each connected SC17A30048
cable. Therefore, you can only rename an "active" channel where a
"powered" SC17A30048 is available. Besides, the channel name will
disappear or be moved to another port if you swap the SC17A30048 to a
different port.
To change channel names:
1. If the OSD is not displayed, press the hot key 3 times.
The default hot key is 'Scroll Lock.' To change it, see
Settings
(on page 21).
2. On the Selection Menu, select an
If the desired channel is not shown on the current page, press
Page Up or Page Down.
3. The RENAME page displays. Type a name up to 14 characters.
4. Press Enter to save the new name, or Esc to cancel it.
5. Repeat the same steps for additional channels.
17
Chapter 4: Using the On-Screen Display Interface
active
channel and press F3.
System