Dirt Devil 110000 Panduan Pemilik - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Pemilik untuk Penyedot Debu Dirt Devil 110000. Dirt Devil 110000 6 halaman.

Halaman Cetak

CORDRELEASE

HEIGHT ADJUSTLEVER

Turn

the

height

adjustment knob to

match the surface

being

cleaned.

iMPORTANT:

For

easiest adjustment,

place cleaner in full

upright position.

CAUTION: B rush agitator continueste rotate while hose is removed or ill use and at all times while cleaeer

is on. Keep hair, loose clothing, fingers, and all parts of body away from brush area while cleaner is on.

Cleaner must be in the upright pesitiee te lift the rotation brush eft the carpet whee cleaning above the

floor.

ON/OFF PEDAL

FLOOR/CARPET

CLEANING

Plug cord into electricaloutlet.

Turn cleaneron bydepressing

foot pedallocatedon the back

leftside of the cleaner.

HANDLE RELEASE

PEDAL

To release handle, push the

handle release pedal located

on the lower left side of the

cleaner.

and adjust it to

the

desired

position for (a)

storing

the

upright,

(b)

operating

the

cleaner, and (c)

de-press

the

handle release

pedal again to clean under furniture. NOTE:

Rotating brush could cause area rug fringe to

become tanghd within cleaner, Use caution

when vacuuming throw rugs with fringe.

ABOVE FLOOR CLEANING

EXTENSION W AND

CARRYHANDLE

If additional length is

needed,

use

the

extension wand and

crevice tool.

Pull

crevice tool out of

extensionwand. Use

extension wand and

crevice tool together

or separately.

Usethe carry handle on

the Power Brush Tool

caddy to

move the

cleaner from room to

room.

WARNING:TOREDUCE THE RISKOFINJURY FROMMOVING PARTS- UNPLUG BEFORE SERVICING.

EMPTYDIRTCONTAINER

Pressdirt containerrelease

button and remove dirt

containerfrom cleaner,

Hold dirt containerover garbagecan and

presscleanreleasedirt containerbuttonto

empty. Snap dirt containerbottom back

into placeafter emptying.

REMOVE FOAM FILTER

REMOVE FILTER

CARTRIDGE

Click buttons on the base of

the cleaner toward the outside

edges to unlock filtercartridge.

CLEAN PLEATED FILTER

Cleanermust be in its upright

positionto raise brushroll.

Remove the hose from the

tool caddy.

wand or hose handle. To remove tool, twist

and pull apart gently.

Lift filter cartridge out of base

of cleaner.

Removefoam filter from filter

cartridge.

Tap the pleated filter on the

inside of a garbage can to

removeexcessdustand dirtfrom

filter. If filter is still clogged,rinse

underrunningwater and allowto

dry for at least 24 hours before

replacingin cleaner.