Dirt Devil 360 REACH DD360 Panduan Pengguna - Halaman 13
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyedot Debu Dirt Devil 360 REACH DD360. Dirt Devil 360 REACH DD360 20 halaman.
Halaman Cetak
- 1. Table of Contents
- 1. Quick Start Assembly
- 2. Tools
- 3. Using the Tools
- 3. Above Floor Cleaning
- 4. How to
- 4. Empty the Dirt Cup
- 4. Clean the Rinsable Filter
- 4. Clean the Exhaust Filter
- 4. Clean the Cyclonic Filter Assembly
- 4. Clean the Brush Roll
- 4. Store Your Unit
- 5. Troubleshooting
- 6. Technical Specifications
CLEAN THE RINSABLE FILTER
1. Press the Dirt Cup release
button.
3. Rinse filter with water until the
dirt disappears. Shake it out
and then let it dry for 24 hours
or until completely dry.
NOTE: Do not use your vacuum cleaner with blocked filters and
without all the filters in place.
WARNING
To reduce the risk of personal injury - Unplug before
cleaning or servicing.
2. Twist clockwise and pull the
Filter Frame out.
4. Put the dry filter back in by
aligning the tabs and twist
anti-clockwise into place.
You will hear a click when the
filter is secured back in its place.
TIP: Place thumb and finger
in the grooves (x) then rotate
clockwise to remove, you will
hear it click.
x
x
Top view
of filter frame
7 13