Nikon TIRF Petunjuk Manual - Halaman 9

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Kamera Digital Nikon TIRF. Nikon TIRF 37 halaman. System for te2000

13. Do not place any objects on system equipment

To prevent deformation, failure, or malfunction, and to avoid injury, never place any objects

(heavy ones in particular) on any component of the system.

14. Handling

1) Handle with care

This system is a precision optical instrument. Make sure that the system is not subject to

shock; handle equipment gently. Also be sure to handle cables with care. Optical-fiber

cables, in particular, must not be bent or pulled with excessive force, to prevent failure,

malfunction, or broken wires.

2) Installation conditions

To ensure safe and reliable operations, observe the following conditions when installing the

system:

• To prevent equipment from falling and to avoid eventual failure, install each component

of the system on a level surface.

• To prevent performance degradation caused by dust or other foreign particles, use the

system in a clean environment.

• Use the system at ambient temperatures of between 5 and 35°C and in conditions of

humidity of 60% or less (no condensation). To prevent condensation and failure, never

attempt to use the system under conditions of high temperature and humidity.

• Make sure that the system is not subject to strong vibrations, which may degrade image

quality. Consult with your Nikon representative about preventive measures you may

take when your system is installed.

• To prevent degradation, malfunction, or failure of your laser units always use power

supply that is free from electric noice or sudden voltage fluctuations.

• To prevent failure, do not block or place any obstacles near the cooling fans of the

controller or laser units. If a particular piece of equipment is installed close to a wall, be

sure to provide at least 15 cm of space between the wall and the equipment.

3) Cleaning

Use a dry and soft cloth to clean painted, plastic, and printed parts. If necessary, wipe

these parts with a cloth moistened with diluted neutral detergent, then wipe off the moisture

with a soft and dry cloth. To prevent discoloration or deformation of painted or plastic parts

or removal of the printed letters/figures, do not use organic solvents such as paint thinner

or alcohol.

4) Other precautions

Be sure to follow the instructions specified in this manual. Failure to do so may result in

impaired system performance, malfunction, failure, or unexpected hazards.

Safety Precautions (Read the following before use!)

- 7 -