Nikon D200 Panduan Pengguna - Halaman 10

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Lensa Kamera Nikon D200. Nikon D200 19 halaman. Exploring
Juga untuk Nikon D200: Brosur & Spesifikasi (13 halaman), Brosur (7 halaman), Setup Manual (2 halaman), Brosur & Spesifikasi (18 halaman), Brosur (14 halaman), Spesifikasi (2 halaman), Fitur & Bagan Perbandingan (1 halaman), Spesifikasi (2 halaman), Panduan Pengoperasian (23 halaman), Panduan Memulai Cepat (2 halaman), Manual (25 halaman), Panduan Memulai Cepat (9 halaman)

Hugyfot

Strobe Connections

The Hugyfot strobe connections are integrated in the leakage detector

circuit board. This circuit board runs on a single 3.6 Volt 1/2 AA Lithium

battery. The main parts of this system are described as below.

External strobe connection

Nikonos 5-pin or S6-pin

TTL Converter

Standard setup .

External strobe connection(s) A is (are) connected to D and/or E on leakage detector. Hotshoe B is connected to

C on leakage detector. X is used for ﬁrmware upload.

Setup with TTL converter .

External strobe connection(s) A is (are joined and) connected to D on leakage detector. Connection E on leakage

detector is joined with connection F on TTL converter. Hotshoe B is connected to H on TTL converter. G is power

supply on TTL converter.

In case you run out of batteries, a backup system is provided. TTL control will no longer be available!

Backup for standard setup .

External strobe connection(s) A is (are) connected to J and/or K on backup circuit board. Hotshoe B is connected

to I on backup circuit board.

Backup for setup with TTL converter .

External strobe connection(s) A is (are joined and) connected to J or K on leakage detector. Hotshoe B is con-

nected to I on backup circuit board.

Hugyfot Housing for

Internal camera hotshoe

Nikon or Canon

Backup

Nikon D200

Hugyfot leakage warner with integrated

strobe connections Nikon or Canon

Battery holder for

3.6 V 1/2AA Lithium battery

User manual