Nikon DS-5MC Petunjuk Manual - Halaman 18

Jelajahi secara online atau unduh pdf Petunjuk Manual untuk Aksesori Kamera Nikon DS-5MC. Nikon DS-5MC 49 halaman. Ds camera control unit, ds camera head, ds cooled camera head
Juga untuk Nikon DS-5MC: Petunjuk Manual (47 halaman), Referensi Cepat (15 halaman)

Halaman Cetak

(3) Connecting the Nikon 80i/90i Microscope

Connect the digital imaging head mounted on the 80i or the 90i microscope to the USB (H)

connector of the DS-U2. Be sure to use the USB cable provided with the microscope.

(4) When connecting external devices (trigger signal output devices)

Before connection, always turn off the DS-U2 and external devices.

When the DS-Qi1Mc or DS-Ri1 is connected, triggered capture from external devices is possible by

supplying trigger signals to the EXT. I/O connector.

If you are preparing your own external device, use a device that meets the following specifications.

Connector: φ3.5 mm stereo pin jack

Functions

Pin 1: Trigger input

Pin 2: Read-out transfer timing signal (output)

The TTL or LVTTL level signal can also be supplied through Pin 1.

In triggered capture, exposure is timed to the falling edge of the trigger signal. Settings configured

beforehand in the computer program for exposure time and camera gain are used. Captured

images are transferred via USB and displayed in the program.

The timing sequence of triggered capture is as follows.

Chapter 4

Connecting and Installing the Equipment

Connection Methods

Pin 3: GND

Pin 2

Pin 1

3.3V

4.7kΩ

100Ω

Pin 2

3.3V

4.7kΩ

Pin 1

Pin 3

DS-U2

Operates when the switch is on (closed)

Pulse width: 1 ms or more

External device

- 12 -