Nikon SB-10 Buku Petunjuk - Halaman 9

Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Lampu kilat kamera Nikon SB-10. Nikon SB-10 24 halaman.

Halaman Cetak

1. Settingup

FLASH SYNCHRONIZATION

Nikon FE

When the camera is

automatic

mode, mount-

ing

the 58-10

unit

onto the

camera body

and turning on both the

unit

and the camera's

meter

automatically set the shutter speed of the

camera at 1/90 second. And when the ready-

light

built into the eyepiece of the FE camera

glows, it

indicates

readiness

for

flash shooting.

When

manual

mode, set

the

shutter speed

1/125

sec. or slower

Turn

the unit

and

when the ready-light

lights up,

you are

ready

for flash

photography.

When the shutter speed

set beyond the camera's sync range, the

ready-light

flickers as a sync warning signal

However,

it is kept

lit if the

film-advance

lever

is depressed (i .e ., turning off

the meter).

The built-in

hot

shoe contact eliminates the

need

for a sync cord.

With the Nikkormat EL

and

ELW,

first

set the

shutter speed at

1/125

sec. or slower.

Then lift

and

turn the knurled

sync selector ring around

the shu

tter-speed di

u nti I the I igh tn ing

symbol

(7')

appears

the selector window.

A hot-

shoe contact

built into

the

mounting foot

the 58-10 eliminates the

need

for a sync cord.

With the Nikon EL2

and

FM,

and

Nikkormat

FT2 and FT3,

set

the

camera shutter

speed for

1/125

sec. or slower.

Due

to the

built-in

auto-

matic

sync switchover

mechanism, this is the

only step

necessary to

ensure

proper

flash

operation.

The

built-in

hot

shoe contact elimi-

nates the need

for a sync cord.