CUAV P8 Panduan Pengguna - Halaman 3

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Radio CUAV P8. CUAV P8 8 halaman.
Juga untuk CUAV P8: Panduan Pengguna (10 halaman)

Button Definition

RESET Button

CONFIG Button

Power Requirement

We recommend that you use a 3S-12S battery to power the P8. Both the sky end and

the ground end need independent power supply, please ensure that the maximum

output current of the power supply is> 2.5A (battery is recommended).

* Note: Do not use computers or power bank with output current lower than 2A to

supply power to the equipment; Otherwise, it may lead to irreversible damage to the

equipment.

The default configuration of P8 is: airspeed 115K, interface speed 57600, broadcast

Restart the P8 Radio module

Pressing it alone is not defined. Press and hold the

CONFIG and RESET Key at the same time. Release the

RESET key first, and then release the CONFIG key to

enter the configuration state.

- 3 -