Dirt Devil DDW03-E01 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Penyedot Debu Dirt Devil DDW03-E01. Dirt Devil DDW03-E01 20 halaman.

TEST FOR COlOUR FASTNESS

Wet a white absorbent cloth with the

solution. In a small hidden area of your

carpet/rugs /upholstery gently rub with

the dampened cloth. Wait ten minutes

and check for colour removal or bleed

with white paper towel or cloth. If your

carpet has more than one colour, check

all colours.

Test your carpet/rugs/upholstery –

Run the carpet washer over a small

hidden area. If no pile distortion occurs

continue cleaning.

Push handle into main body.

IMPORTANT: Your dirty water tank

is fitted with a float. When the dirty

water tank is full, or the nozzle is not

in contact with the carpet the float

will shut off the suction on the carpet

washer. You will be able to hear if this

has happened as the motor noise on

the machine will increase. Once the

float is activated, empty the dirty water

tank if full. If the dirty water tank is not

full then turn off your machine at the

power switch and wait for the float to

settle.

Always unplug the carpet washer

before performing any maintenance/

troubleshooting checks.

Turn handle lock dial clockwise to

lock in place.