Clas Ohlson 34-9424 Buku Petunjuk
Jelajahi secara online atau unduh pdf Buku Petunjuk untuk Perabotan Dalam Ruangan Clas Ohlson 34-9424. Clas Ohlson 34-9424 4 halaman. Inflatable mattress
Halaman Cetak
Inflatable Mattress
Art.no 34-9424
Please read the entire instruction manual before using the product and save it for future reference. We reserve the right for any errors
in text or images and any necessary changes made to technical data. If you have any questions regarding technical problems
please contact Customer Services.
Safety
No protection against
drowning.
Intended for max. one adult.
Not for children under 14 years. Do not use in offshore winds.
Operation
1. Make sure that the mattress is laid on a level surface
free from stones and sharp objects.
2. Only use a foot pump or hand pump to inflate
the mattress.
NB. Do not use compressed air; the mattress
cannot withstand high pressures.
3. Make sure that all the valves are properly closed
after inflation.
4. Squeeze the valve to open the non-return valve when
deflating the mattress and keep the valve open with
a small object. Be careful not to damage the mattress.
Care and maintenance
• Wash the mattress using clean water only; do not use
solvents or corrosive chemicals.
• Do not leave the mattress in direct sunlight for long
periods; this will shorten its useful life.
GREAT BRITAIN
For consumer contact, please visit www.clasohlson.co.uk
and click on customer service.
Read the instructions before
using the product.
Keep safe distance to shore.
For swimmers only.
The product must be
well balanced.
Do not use in offshore tides
or currents.
If the mattress is not to be used for a long time
• Make sure that it is clean and dry.
• Store it in a dark and cool place, but no cooler than +5 ˚C.
• Make sure that no sharp objects or edges can damage
the mattress.
Small holes can be repaired using the provided patches
1. Localise the leak.
2. Drain the mattress of air.
3. Clean the area around the leak and make sure it is dry.
4. Cut the repair patch to the correct size and press it over the hole.
5. Allow the repair to dry for 24 hours before using the mattress again.
6. If the hole is larger than 2.5 cm (1 inch), use a silicon- or rubber-
based glue to apply the provided patch or other suitable patch
over the hole. Read the instructions on the glue and make sure
it is suitable for inflatable mattresses.
Disposal
Follow local ordinances when disposing of this product. If you
are unsure of how to dispose of this product, please contact your
local authority.
Max. load 80 kg.
Fully inflate all air chambers.