ARMOUR System+ 24 Manual - Halaman 12

Jelajahi secara online atau unduh pdf Manual untuk Kompresor Udara ARMOUR System+ 24. ARMOUR System+ 24 20 halaman.

ARMOUR System+ 24 Manual
EN
c) Disconnect the plug from the power source
and/or the battery pack from the power tool
before making any adjustments, changing
accessories, or storing power tools. Such
preventive safety measures reduce the risk of
starting the power tool accidentally.
d) Store idle power tools out of the reach of
children and do not allow persons unfamiliar
with the power tool or these instructions
to operate the power tool. Power tools are
dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment
or binding of moving parts, breakage of parts
and any other condition that may affect the
power tool's operation. If damaged, have the
power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
f)
Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g) Use the power tool, accessories and tool bits
etc. in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power
tool for operations different from those intended
could result in a hazardous situation.
h) If the supply cord is damaged, it must be
replaced by a special cord or assembly
available from the manufacturer or it's service
agent.
5) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
When using the pump, always observe the following
safety instructions.
Before use check the pump for damage.
Should the pump be damaged, it must not be
used.
Only connect the pump to an electric group
which is protected with an earth leakage switch
(30 mA).
Do not use the pump in swimming pools
12
or other places where persons could find
themselves in the vicinity of the pump in the
water.
Do not use the pump in fish ponds or fountains.
Never use the pump if no outlet pipe of min. 20
cm has been fitted.
If the pump is used for pumping drinking water,
the installation must be rinsed thoroughly.
Never let the pump run dry.
Never carry the pump by the mains cable or
float switch, but only by the handle.
Always remove the mains plug from the wall
socket before moving or servicing the pump.
If the mains cable is damaged, it has to be
replaced by the manufacturer, its after-sales
service or a similarly qualified person, in order
to avoid a danger.
The following symbols are used throughout this
manual:
Denotes risk of personal injury or damage
to the machine.
ADDITIONAL SAFETY INSTRUCTIONS FOR
COMPRESSORS
Be cautious when using compressed air. Never
aim the air flow at people or animals. Preferably
wear safety glasses. Do not use compressed
air to clean clothing.
Compressed air is not suitable to inhale.
Do not exceed the maximum operating
pressure. Do not perform any adjustments to
the machine because of which the maximum
operating pressure may be exceeded.
Never exceed the maximum allowed pressure
of the equipment to be connected or the items
to be inflated with this machine.
Do not use the machine in an ambient
temperature below 5 °C.
Only use the machine in dry, well-ventilated
surroundings. If the machine is used for the
spraying of inflammable substances, place the
machine upwind and at a safe distance.
SYSTEM+