Dirty Hand Tools 101571 Panduan Pengoperasian - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Anakan Dirty Hand Tools 101571. Dirty Hand Tools 101571 20 halaman. 15” front tine tiller

Halaman Cetak

Operating Precautions

READ, UNDERSTAND AND FOLLOW ALL OF THE

PRECAUTIONS BELOW.

Always perform the pre-start checklist before starting the engine.

• Never operate the tiller without safety shields in place.

• Keep hands, feet, and clothing away from rotating parts. Keep clear

of tiller tines at all times.

• Tines rotate when the engine is running and drive lever is depressed

(pulled towards the handlebars). Releasing the drive lever stops the tines.

• Use extreme caution when operating on or crossing gravel drives,

walks, or roads. Stay alert for hidden hazards or tra c.

• After striking an obstacle, stop the engine, remove the wire from the

spark plug, inspect the tiller for damage and repair before restarting.

• If tines become clogged, stop the engine and disconnect the spark

plug wire before removing any obstruction.

• Engine mu er will be hot from operation. Do not touch it with bare

skin or a severe burn may result.

• If the unit vibrates abnormally, stop the engine and check immediately

for the cause. Vibration is an indication of a potential problem.

• Do not run the engine indoors; exhaust fumes are deadly.

• Do not overload the tiller by trying to till too deep or too fast.

• Never operate the machine at high transport speeds on slippery

surfaces. Look behind and use care when backing.

• Use only attachments and accessories approved by the manufacturer.

• Never operate the tiller without good visibility or adequate light.

• Be careful when tilling in hard ground.

ground and propel the tiller backwards. If this occurs, let go of the

handlebars and do not restrain the machine.

• Take precautions when leaving the machine unattended. Disengage

all control levers, stop the engine, wait for all moving parts to stop, and

make certain guards and shields are in place.

• Shut o the engine when leaving the operating position for any

reason. Wait for all moving parts to stop.

OPERATION OF ANY TILLER CAN RESULT IN FOREIGN

OBJECTS BEING THROWN. ALWAYS WEAR

SAFETY GLASSES DURING OPERATION.

CAUTION

e tines may catch in the

WARNING