Dirty Hand Tools 101571 Panduan Pengoperasian - Halaman 17

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Anakan Dirty Hand Tools 101571. Dirty Hand Tools 101571 20 halaman. 15” front tine tiller

Halaman Cetak

TRANSMISSION

OIL FILL

Figure 13

Maintenance

• Keep tiller, safety shields and covers, attachments, and accessories

in safe working condition.

• Check clevis pins, engine mounting bolts, and other bolts at

frequent intervals for proper tightness to be sure the equipment is

in safe working condition.

• To prevent accidental starting, always disconnect and secure the

spark plug wire from the spark plug before maintenance.

• Never run the engine indoors. Exhaust fumes are toxic.

• Always allow muﬄer to cool before ﬁlling fuel tank.

Lubrication

Proper lubrication of moving mechanical parts is critical for proper

care and maintenance. Oil the cables and other moving parts at 10

hour intervals using a SAE30 engine oil.

Checking Transmission Oil

e transmission oil is ﬁlled at the factory. Should it require ﬁlling

use SAE30 engine oil and ﬁll to top of the reservoir (see Figure 13).

Cleaning the Tine Axle Shaft

1. Turn oﬀ engine. Engine must be cool.

2. Remove spark plug wire and secure from spark plug.

3. Tip the tiller backward. Block the tiller in position so that the

tines are exposed.

4. Remove all vegetation, string, wire, and other material that may

have accumulated on the axle between the inside set of tines.

TURN OFF ENGINE AND DETACH SPARK PLUG WIRE.

ENGINE MUST BE COOL.

Engine Maintenance

Refer to the engine manual included in your parts packet for

information on engine maintenance. Your engine manual provides

detailed information and a schedule for performing the following:

1. Check oil level before each use and after 8 hours of operation.

2. Change oil after ﬁrst 5-8 hours of operation. Change oil while

engine is warm. Reﬁll with new oil of recommended grade.

4. Check spark plug yearly or every 100 hours of operation.

5. Service air cleaner.

6. Keep engine and parts clean.

7. Check engine and equipment often for loose nuts and bolts.

WARNING