Armstrong Air BCE7E-048 Panduan Petunjuk Instalasi
Jelajahi secara online atau unduh pdf Panduan Petunjuk Instalasi untuk Penangan Udara Armstrong Air BCE7E-048. Armstrong Air BCE7E-048 19 halaman.
Halaman CetakThis is a safety alert symbol and should never be ignored. When you see this symbol on labels or in
manuals, be alert to the potential for personal injury or death.
General Information .....................................................4
Shipping and Packing List ...........................................4
Requirements ..............................................................4
Installing the Unit .........................................................4
Brazing Connections ...................................................7
Installing the Condensate Drain ..................................8
Inspecting and Replacing Filters .................................9
Sealing the Unit ...........................................................9
Measuring Static Pressure ..........................................9
NOTE: Special procedures are required for cleaning the all-aluminum coil in this unit. See Page 16 in this instruction
for information.
IMPORTANT INFORMATION FOR INSTALLER
CHECK FOR AND REMOVE THESE ITEMS BEFORE OPERATING UNIT.
BLOWER HOUSING
SUPPORT PAD
HORIZONTAL DRAIN PAN
(SEE PAGES 5-6)
D
REFRIGERANT LINE PLUGS
(SEE PAGE 6)
215 Metropolitan Drive
West Columbia, SC 29170
507838-01
INSTALLATION INSTRUCTIONS
BCE7E Series Air Handler
This manual must be left with the homeowner for future reference.
Table of Contents
TOP CAP SHIPPING
BRACKET (REPLACE
SCREWS IN TOP CAP
AFTER REMOVAL)
Save these instructions for future reference
Adjusting Blower Speed ............................................10
Blower Data ...............................................................11
Making Electrical Connections ..................................13
Homeowner Maintenance..........................................16
Professional Maintenance .........................................16
Repairing or Replacing Cabinet Insulation ................16
Check-out Procedures ...............................................17
Use of Air Handler During Construction.....................17
DRIP SHIELD. (USED FOR -060 UNITS, HORIZONTAL
APPLICATIONS ONLY.) (SEE PAGES 5-6.) SHOWN
INSTALLED ON DRAIN PAN IN -060 UNIT.
*P507838-01*
Issue 1813
D
(P) 507838-01
Page 1 of 19