Disc Makers ElitePro Panduan Pengguna - Halaman 5
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Duplikator Disk Disc Makers ElitePro. Disc Makers ElitePro 13 halaman. Elite series
Halaman Cetak
ElitePRO_Getting_Started_03.indd 5
2
Open the latch on the left cartridge holder, labeled 57, by pushing upward on
it.
3
Unwrap the color cartridge, remove the tape from the ink nozzles, and insert the
cartridge into the holder. The cartridge should slide easily into place—you do
not need to force it.
4
Lower the latch and snap it into place to secure the cartridge.
5
Repeat this same procedure for the black cartridge that inserts into the right
cartridge holder.
6
Close the printer cover when both cartridges are securely installed in their hold-
ers. The printer goes through a brief sequence to prepare the cartridges for
printing.
Note: You can test the operation of the printer during the procedure described in
the section titled Operating the duplicator.
ElitePRO Getting Started Guide
2/20/06 4:40:05 PM
5