Armstrong Monitoring Corporation 1044-T Panduan Petunjuk Pemasangan dan Pengoperasian - Halaman 4

Jelajahi secara online atau unduh pdf Panduan Petunjuk Pemasangan dan Pengoperasian untuk Aksesori Armstrong Monitoring Corporation 1044-T. Armstrong Monitoring Corporation 1044-T 16 halaman. Nema 4x for sensor/transmitter

Halaman Cetak

2 PRODUCT INFORMATION

Monitor Part Number ..........................................

Monitor Serial Number .........................................

Power Supply Requirements .................................

Operating Temperature Range ..............................

Relative Humidity ................................................

Contact Rating ...................................................

Sensor/Transmitter

Part No.

TORQUE SPECIFICATIONS:

POWER SUPPLY:

Neutral terminal screw ........................................................................

Hot terminal screw ..............................................................................

Ground Lug screw ............................................................................. 15 pound-inches.

RELAY:

Relay socket terminal screws ...............................................................

Note:

All Armstrong Monitoring systems must be installed and maintained according to

instructions, to ensure proper operation. Only qualified technicians should install and

maintain the equipment.

AMC-1044-T Monitor

Serial No.

120 VAC, 60 Hz, 20 W max.

0-99% RH, non condensing

1/3 hp @ 120 VAC/240 VAC, 10 Amps

@ 28 VDC/120 VDC/240 VAC

Type of Gas

iii

0° C to 50°C

Alarm Trip Points

Low

High

7 pound-inches.