Disc Makers MacElite 4 Panduan Pengguna - Halaman 8

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Duplikator Disk Disc Makers MacElite 4. Disc Makers MacElite 4 17 halaman. Elite series

Elite2 for Mac Getting Started Guide

Choose the volume on which the software will be installed. Click Continue to begin

the installation on the designated volume.

Enter the administrator password when prompted.

Select the installation type—Custom or Easy Install. If you select Custom, check the

components that you want to have installed. Click Install to continue.

To finish up the installation process, click Restart when prompted. While the computer

is powered down and preparing to restart, start up the duplicator as described in the

following steps.

Powering on the duplicator

With all cables securely connected to the duplicator, press the power switch on the

back of the duplicator cabinet to the "1" position.

Press the power switch on the left side of the cabinet once. The system fan starts spin-

ning and the green and amber activity lights illuminate on the face of the cabinet.

Press the power switch on the front of the printer cabinet to apply power to the

printer.

If the Disc Makers Autoloader Software has been properly installed and the duplicator

is connected to the computer and powered on, the equipment will be recognized by

Discribe once the Mac restarts.