Disc Makers ReflexUltra Panduan Memulai Cepat

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Duplikator Disk Disc Makers ReflexUltra. Disc Makers ReflexUltra 2 halaman. Dvd±r
Juga untuk Disc Makers ReflexUltra: Panduan Pengguna (13 halaman), Panduan Memulai Cepat (2 halaman)

Halaman Cetak

ReflexUltra

Your ReflexUltra has been optimized to work with Disc Makers Ultra™ media. Our Ultra CD-Rs will burn faster with less rejects on the

Reflex's state-of-the-art Plextor drives. That means you won't waste time or money on unsuccessful burns. PLEASE NOTE THAT THE

REFLEX ULTRA CAN ONLY DUPLICATE DISC MAKERS ULTRA CD-Rs. Other media cannot be duplicated in this system and will be

rejected. To order Disc Makers Ultra media, go to www.discmarket.com/ultra, or call 1-888-800-4041.

BASIC OPERATION

THIS SIDE OF THE QUICK START GUIDE HAS BASIC

INSTRUCTIONS FOR DUPLICATING CDs FROM THE

REFLEXULTRA'S 80 GB INTERNAL HARD DRIVE. THE

OPPOSITE SIDE HAS BASIC INSTRUCTIONS FOR

DUPLICATING DISC-TO-DISC, WHICH IS COPYING CD-

Rs FROM A MASTER CD PLACED IN THE UNIT'S TOP

DRIVE. FOR MORE DETAILED INSTRUCTIONS ON THE

REFLEXULTRA'S DUPLICATING OPERATIONS, PLEASE

REFER TO THE GUIDE ON THE ATTACHED CD.

DUPLICATING CD

RS USING THE

INTERNAL HARD DRIVE

The ReflexUltra duplicates in two different modes –

Hard Drive-to-Disc mode, and Disc-To-Disc mode.

The Hard Drive-to-Disc mode copies the CD

master to the unit's hard drive, and then duplicates

the data to each blank CD-R placed in the writer

drives. This ensures an exact copy of the original

master to every disc. The Hard Drive-to-Disc

mode is very efficient for duplicating large

numbers of discs.

1 Power on the ReflexUltra by pressing the round

button at the bottom right on the front of the unit.

The system will initialize and perform a self-test,

which will be displayed on the LCD display area.

™

CD-R Quick Start Guide

2 To set the Reflex to duplicate from the Hard-

Drive-to-Disc mode, press the DOWN arrow until

8. Select Source is displayed in the LCD screen.

Press the ENT button, and then press the DOWN

arrow until SRC: HDD IDEØ Master is displayed

on the screen. Press the ENT button and HDD

Selected will be displayed on the screen. Then

press the ENT button again.

3 To copy your CD master to the hard drive, you

must use the Image function. To access the Image

function, press the DOWN arrow until the LCD

screen displays 9. Image. Press the ENT button

and the following should appear on the LCD

screen:

9-01. Image

Load

4 Place your CD master in the top drive and press

the ENT button. The master disc will begin to be

copied to the hard drive and the LCD screen will

read Image Load OK. The letters P: A that are dis-

played on the screen indicate that your master

image has been successfully loaded into the "A"

partition of the hard drive. (The internal hard drive

of your ReflexUltra is broken into smaller parts

called "partitions." Each partition can hold one CD

image.) Remove your master.

5 Press the ESC button two times until 9. Image

www.discmakers.com

appears in the LCD display. Then use the UP arrow

to return to 1. Copy.

6 You are now ready to duplicate. Load the drives

with Disc Makers Ultra CD-Rs. Close the drives

and press the ENT button. The duplication process

will begin. (If you wish to duplicate fewer than your

unit's full capacity, load the number of Ultra CD-Rs

you need into the drives and press the ENT button

to start the duplication process.) When the duplica-

tion process is completed, the ReflexUltra will eject

the successfully copied discs. When the duplication

is complete, the LCD will display:

1. Copy

OK: 04

P: A

Next to OK: will be the number of successfully

copied discs. In the screen example above, 4

copies were successfully duplicated.

Note: When the duplication process is complete, the

writer drives will automatically eject the CD-Rs that have

been duplicated successfully. The LCD screen will display

the number of copies that have PASSED. If any CD-Rs

have not been duplicated successfully, the LCD screen

will display the number of copies that have FAILED. The

CD-Rs that have not duplicated successfully will remain

in their drives until the eject button on each drive is

pressed. For information on why a CD-R might not copy

successfully, please see the

attached CD.

1-888-800-4041

v1.1

P: A

User's Guide

on the