Disc Makers ReflexPro7 Panduan Pengguna - Halaman 13

Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Perangkat Keras Komputer Disc Makers ReflexPro7. Disc Makers ReflexPro7 15 halaman. Cd-r disc duplicator reflexpro series
Juga untuk Disc Makers ReflexPro7: Buku Petunjuk (13 halaman), Panduan Memulai Cepat (2 halaman)

Halaman Cetak

8. Press 'ESC' to return to the main menu and use the up arrow to change to "8

Select Source." Change to the hard drive for the source (see page 9) and

then use the arrows to go to "9. Image", press 'ENT' then use the down arrow

to get to "9-05 Select Image" to select the partition (see page 9) of the hard

drive that the compilation was moved to. Go to "1.Copy" and make the CD

from the hard drive.

11. Setup

This function allows the user to specify specific parameters for copying CDs.

There are 16 sub items. From the main menu screen pressing "ENT" will show

the sub heading, pressing the up and down arrows allows the user to move

between the settings.

11.01 Language: allows the user to set English or Spanish as the display lan-

guage.

11.02 Burn Speed: allows the user to change the speed at which the unit burns

a CD. By pressing the 'ENT' button the current setting will be displayed,

the user can then press the up and down arrows to change to the

desired speed. Pressing the 'ENT' button will set the speed. Press 'ESC'

to go back to the main menu.

11.03 Read Speed: allows the user to change the speed at which the unit reads

a master CD. By pressing the 'ENT' button the current setting will be dis-

played, the user can then press the up and down arrows to change to

the desired speed. Pressing the 'ENT' button will set the speed. Press

'ESC' to go back to the main menu.

11.04 Auto Start Drive set to 'On' will start a copy function as soon as blank

media is detected in the writer drive. The default setting is 'Off".

11.05 Startup Menu allows the user to have the ReflexPro start up to any of the

first seven options in the main menu.The default setting is 'Copy'.

11.06 Auto Verify set to 'On' will do a verify after every copy is made. The

default setting is 'Off'.

11.07 Auto Compare set to 'On' will do a comparison after every copy is made.

The default setting is 'Off'.

11.08 Auto PreScan set to 'On' will do a prescan on every CD placed in the read-

er drive. The default setting is 'Off'.

1-800-237-6666

11.09 Eject Disc allows the user to choose what will happen at the end

of function. The three choices are: Eject Good Only, Eject All Disc, and

Do Not Eject. The eject option is only available on the Copy, Test and

Copy, Verify, and Compare functions. The default setting is "Eject Good

Only".

11.10 Burn on the Fly allows the user to burn an image of the master to the

hard drive then to blank media. The difference between this and loading

an image is that with "Burn On The Fly" set to 'off' the image will be

immediately erased after the write to the blank media. Set to 'On' the

ReflexPro will write directly from disc to disc without sending an image

to the hard drive first. With "Burn On The Fly" set to 'off' Safe will appear

in the upper right of the LCD display. The default setting is 'On'.

11.11 Burn Mode allows the user to choose Disc at Once or Track at Once for

the burn function. The default setting is 'DAO' Disc at Once.

11.12 Button Sound set to 'On' will cause any pressing of the control buttons to

make a sound. The default setting is 'On".

11.13 Device Info has information on the writer and reader drives.

11.14 System Info has information on the controller of the ReflexPro.

11.15 Quick Erase erases the TOC of CD-RW discs.

11.16 Full Erase erases all the data on a CD-RW disc.