Aercus WS1093 Panduan Pengoperasian - Halaman 12

Jelajahi secara online atau unduh pdf Panduan Pengoperasian untuk Stasiun Cuaca Aercus WS1093. Aercus WS1093 20 halaman. Professional wireless weather station with touchscreen and usb upload

Halaman Cetak

+ button or – button for 3 seconds to change the number faster. Touch the ON/OFF button to turn

the alarm on or off (the alarm icon will be turned on indicating the alarm function has been

activated).

4) Touch the rain section a fourth time to display the current maximum rain fall record. Touching the

rain section for 3 seconds will reset the maximum rain fall value to the current value.

5) Touch the rain section a fifth time to reset the rain fall value to 0. By pressing the rain section for 3

seconds the 1h, 24h, week, month and total rain will be reset to 0.

Pressure

1) Touch the PRESSURE section, the + and – button will be flashing. Touch the + button or – button to

shift the display between Absolute pressure and Relative pressure. Relative pressure value - if you

are significantly above sea level you will need to calibrate the air pressure reading to allow for your

altitude. To do so make sure you have selected Relative as above and change the pressure reading

to match with a local benchmark such as the local air pressure provided for your area on the Met

Service or Bureau of Meteorology websites. If Absolute pressure is selected, skip this step.

2) Touch the PRESSURE section again, the + and – button will be flashing. Touch the + button or –

button to shift the display unit between hPa, inHg and mmHg.

3) Touch the PRESSURE section a third time to set the Relative Pressure value. The + and – button will

be flashing, the rel icon will light up. Touch the + button or – button to change the value, hold the +

button or – button for 3 seconds to change the number faster.

4) Touch the PRESSURE section a fourth time to set the pressure high alarm function, the +, ON/OFF

and – button will be flashing, the HI AL icon will light up. Touch the + button or – button to change

the value, hold the + button or – button for 3 seconds to change the number faster. Touch the

ON/OFF button to turn the alarm on or off (the alarm icon will be turned on indicating the alarm

function has been activated).

5) Touch the PRESSURE section a fifth time to set the pressure low alarm function, the +, ON/OFF and –

button will be flashing, the LO AL icon will light up. Touch the + button or – button to change the

value, hold the + button or – button for 3 seconds to change the number faster. Touch the ON/OFF

button to turn the alarm on or off (the alarm icon will be turned on indicating the alarm function has

been activated).

6) Touch the PRESSURE section a sixth time to display the maximum pressure record, the recorded

maximum value will be flashing, the MAX icon will light up. By pressing the maximum value for 3

seconds the maximum value will be reset to the current reading.

7) Touch the PRESSURE section a seventh time to display the minimum pressure record, the recorded

minimum value will be flashing, the MIN icon will light up. By pressing the minimum value for 3

seconds the minimum value will be reset to the current reading.

Note: when absolute pressure is selected, step 3 will be skipped since absolute pressure is selected for

display.

- 12 -

WS1093