DISCO DAC552 Panduan Instalasi - Halaman 19
Jelajahi secara online atau unduh pdf Panduan Instalasi untuk Melihat DISCO DAC552. DISCO DAC552 20 halaman. Automatic dicing/cutting saws
Halaman Cetak3. Safety Precautions to Be Observed During
Operation
Safety precautions to be observed during operation
This section describes the safety precautions that should be understood before
starting operation and observed during operation by operators.
- Blade section
- Moving parts
- When the machine interior or floor get wet with water
- Maintenance key storage
The blade has a sharp edge. Therefore, if your fingers or hands
come into contact with it, they may be scarred or cut off.
Do not place your fingers or hands beneath the blade.
If you place your fingers or hands in a motor driven part, they may
be caught or cut off.
Do not touch any moving parts during operation.
Do not put your fingers or hands into the operating space of any
moving parts.
If you operate the machine while its interior or floor get wet with
water, you may receive electric shock that could result in serious
injury or death.
If the machine is wet with water, do not turn ON the facility power
supply until it dries.
If the floor is wet with water, turn OFF the facility power supply and
wipe the floor dry.
The maintenance key is an interlock related key for use with the
machine. It is used to disable the power shutoff feature for axis
drivers except for the spindle while the waterproof cover is open.
This key must be stored with due care by qualified maintenance
personnel.
When the key is needed during machine operations, the associated
operations must be carried out with due care by the maintenance
personnel.
WARNING
A-5