Armytek Elf C1 Micro-USB Panduan Pengguna - Halaman 4
Jelajahi secara online atau unduh pdf Panduan Pengguna untuk Senter Armytek Elf C1 Micro-USB. Armytek Elf C1 Micro-USB 4 halaman. Multi flashlight
Juga untuk Armytek Elf C1 Micro-USB: Panduan Pengguna (2 halaman)
Halaman Cetak
Warnings
For effective operation of the flashlight, we recommend branded 18350
batteries or 16340 Li-Ion batteries without PCB (unprotected) or with
PCB which guarantees 3A discharge current.
The flashlight can get hot in Turbo mode quickly and discharge the
battery with high current. Don't leave it without your attention as very
bright light might heat objects and cause fire.
1. Always follow the instructions from this manual and recommenda-
tions on battery usage.
2. Apply only the recommended power sources.
3. Do not reverse battery polarity.
4. Do not modify or recast the flashlight and its components as it will
deprive you of the warranty.
5. Do not allow water or any other liquid to leak into the flashlight.
6. Do not aim a switched-on flashlight at people's or animals' eyes – it
can cause temporary blindness.
7. Do not allow children to use the flashlight without your assistance.
The producer will not be liable for any harm done to the user if it
was caused by improper use of the product.
Care and Storage
It is recommended to clean the threads and O-rings off dirt and old
grease once or twice per year. Remember that reliable protection from
water and dust cannot be provided by worn out sealing. The fouling
as well as lack of lubricant cause fast wear-out of threads and sealing
rings.
To clean the threads do the following:
1. Unscrew the tailcap and remove the sealing ring carefully with a
toothpick (do not use sharp metal things as they can damage the
ring).
2. Wipe the sealing ring thoroughly with a soft cloth (or tissue). Do not
use solvents. If the sealing ring is worn out or damaged replace it by
a new one.
3. Clean the metal threads with a brush using ethanol. Be careful not to
allow the applied liquid to get inside the flashlight or tailcap as it can
cause fails in functionality of the flashlight.
4
ENG USER MANUAL ELF C1
After cleaning lubricate the thread and the sealing ring with polyal-
phaolefin-based silica grease, e.g. Nyogel 760G. The application of
other types of grease is unacceptable. In case of active operation and
exploitation in dusty environments, it is recommended to perform
cleaning and lubricating of the parts as often as required.
WE DO NOT RECOMMEND to leave power sources inside the flash-
light for a long storage period, as batteries (especially non-recharge-
able) can leak for various reasons and damage the inner parts of the
flashlight. If you want to keep your flashlight in a stand-by state with
batteries in, previously install new and high-quality batteries, store
the flashlight in acceptable for batteries operational temperature and
revise the batteries' state at least once a month. If you have noticed any
signs of defects, withdraw the batteries from the flashlight and dispose
of them.
Warranty and Service
Armytek provides free warranty repairs for 10 years (excluding bat-
teries, chargers, switches and connectors, which have 2-year warran-
ty) from the date of purchase if there is a document confirming the
purchase. The warranty does not extend to damage during:
1. Improper usage.
2. Attempts to modify or repair the flashlight by nonqualified
specialists.
3. Long-term application in chlorinated and contaminated liquids or
sea water.
4. Exposure to high temperatures and chemicals (including the liquids
from defected batteries).
5. Usage of low-quality batteries.
Armytek Optoelectronics Inc.
Germany, 10551 Berlin, Jonasstraße 6
+1 (206) 785-9574, [email protected]
www.armytek.com
REV_00-0000